Introduction to the Reasons and Solutions for the Blockage of Plastic Woven Bag Crusher

Plastic woven bags are a common packaging bag in our lives. These discarded woven bags have strong ductility and are prone to entanglement during crushing and volume reduction. What should I do if I encounter this problem? The following editor will introduce the reasons and solutions for the blockage of plastic woven bag crushers for large pieces. Let's understand together!

Reasons and solutions for the blockage of plastic woven bag crusher

1. The structure design of the crusher is unreasonable

Solution: For this problem, you need to avoid this pit in the early stage of purchase. When choosing, you should bring materials for on-site test machine, understand the actual processing performance of the equipment, and avoid the problem of unreasonable structural design.

2. Fast feeding speed and large equipment load

Solution: When the plastic woven bag crusher is working, try to control the current at about 85% of the rated current to ensure uniform feeding and avoid clogging caused by too fast feeding.

3. The discharge pipe is not smooth or blocked or the conveying equipment is not matched, and the discharge pipe is blocked

Solution: Clean the discharge port to ensure smooth discharge. If the problem has not been solved, consider replacing the unmatched conveying equipment and adjust the feeding amount to ensure the normal operation of the equipment.

4. The blade is passivated, the screen mesh is closed and the water content of the crushed material is too high

Solution: Sharpen or replace the worn blades in time, check and clean the screen mouth regularly, and control the moisture content of broken plastic products to 14% to reduce the occurrence of clogging.

During the use of the equipment, the equipment should be cleaned and maintained in time to reduce the failure rate of the equipment, prolong the service life of the equipment, and reduce the operating cost.